Irrigation Valve Replacement & System Repair in San Jacinto, CA

We recently completed a sprinkler system repair for a home in San Jacinto, CA. The homeowner reached out because one of their irrigation zones had stopped working. After checking the system, we found that the valve controlling that zone was broken and needed to be replaced to get the sprinklers working again.

We started by shutting off the water to prevent any leaks during the repair. Then we carefully removed the old valve and cleaned the area around the existing PVC pipes. Once everything was prepped, we installed a brand-new valve using fresh fittings. Each connection was properly primed and glued to make sure the new setup was sealed tight and wouldn’t leak under pressure.

With the valve installed, we reconnected it to the rest of the system so it could be controlled automatically like the other zones. We turned the water back on and ran a full test of the repaired zone to make sure everything was working. The new valve responded just like it should, and there were no signs of leaks or pressure loss.

The system is now back to normal, and the homeowner can run their sprinkler schedule without any issues. It’s a simple fix, but replacing a valve the right way makes a big difference in keeping your yard watered consistently.

If you’re in San Jacinto and having issues with a broken irrigation valve or sprinkler zone, Palacios Landscaping is here to help with professional, reliable service.